TEK10......15-80V Servo Drives

The TEKdrive range of fast, smooth and accurate servodrives are specifically designed for use with Brushed DC Motors in smaller CNC Machine applications. Utilisation of Step and Direction input signals enables the TEKdrive to be used as a direct replacement for stepper motor controllers while delivering greater accuracy and increased speeds. Easy to mount, compact and versatile, the TEKdrive range offer increased safety features with opto-isolated drive circuitry and internal fusing for component failure protection.

Features Include:

•    Power Output over 2000W
•    Dual high speed processors for smooth control
•    Full trimpot PID adjustment during operation
•    Up to 25A continuous current (TEK10)
•    Up to 15A continuous current (TEK20)
•    Encoder dividable by 2, 4 or 8
•    Input and encoder speeds in excess of 2MHZ
•    Accepts either Single or Differential encoders
•    Over-current trip, fully adjustable
•    Over-temperature protection
•    Separate Drive and Fault indicator LEDs
•    Analogue voltage input options
•    Minimal heat generation
•    Mounts vertically or horizontally
•    All controls on one edge for rack mounting
•    Full opto-isolation of motor drive circuitry
•    Separate enable and fault signals   
•    +/- 1V to +/-10V Output, with zero and scale adjustments, for motor tuning or analog motor control.
•    Output voltage can reflect instantaneous Power output or Following error.
•    Logic power supply to motor drivers fused for extra safety.
•    Separate fault indication for following error or over-current faults.

Applications:

•        DC brushed motor control
•        CNC machine conversion & retrofits
•        Analog Servo retrofit
•        Spindle Motor Control
•        Industrial Automation
•        Process Control

TEK6 Brushless & Brush DC Servo Drive

Newly released and available from the second half of January 2008. We are currently taking Pre-orders for immediate distribution upon arrival of the manufacture run. Stock will be initially limited so get in early.

The TEK6 was designed specifically for lighter duty applications where high acceleration and high accuracy are required. With high speed processors and drivers capable of very high currents it can give fast and accurate control of both Brushed and Brushless DC motors. They are ideal for use in machines such as Plotters, Printers and Engravers, but will work equally as well in slower machines such as routers, where the fast acting PID can maintain a high degree of accuracy.

Features
•    Power Output over 200W
•    Dual high speed processors
•    Full Serial PID adjustment during operation
•    Fuzzy PID (F-PID) enhanced control.
•    Delivers up to 8A continuous current
•    Peak current over 30A
•    Operates at supply voltages from 12-24VDC
•    Speeds in excess of 1MHZ
•    Tuning and Fault indicator LEDs
•    Over Voltage/Temp/Current protection
•    Minimal Heat Generation
•    Analogue output of Following Error for tuning
•    Encoder Fault detection

Applications
•    High Speed, High Precision motion control.
•    CNC Printers, Plotters, Lasers and Engravers
•    Small CNC Routers